Sauder August Hill Serie Instrucciones De Montaje página 20

Step 14
å
Fasten a EXTENSION RAIL (40MA) to the RIGHT END (A). Use two GOLD
5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the
enlarged diagram. Then, slide the inner cartridge of the EXTENSION RAIL
in to find the other hole that lines up with the hole in the RIGHT END. Turn a
SCREW into this hole.
å
Insert a WOOD DOWEL (15F) into the RIGHT END (A).
GOLD 5/16" FLAT HEAD SCREW
(2 used for the RAILS)
Page 20
3S
2
3
4
A
426133
Open end
1
15F
www.sauder.com/service