Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE SEAT POSITION
To move the seat forward or backward, while
seated on the bike, put your feet on the floor. Pull
the Adjustment Handle (No. 8) towards you.
Move the seat. Push the Adjustment Handle (No.
8) forward to secure.
ADJUSTING THE LEVEL
If the bike is not leveled, adjust the Rear End Caps
(No. 26). Turn counter-clockwise to raise, turn
clockwise to lower.
ADJUSTING THE TENSION
Adjust the tension by pushing the Tension Control
(No. 78) up to increase the level of resistance.
Push the Tension Control (No. 78) down to
decrease the level of resistance.
Tension levels are set at Level 1 being the lowest
and Level 8 being the highest.
MOVING THE BIKE
Lift the bike by the Rear Stabilizer (No. 7) until the
wheels on the Front End Caps (No. 25) touch the
floor. Now you can move the bike.
15
Publicidad
Tabla de contenido
