Dometic DE 15F Instructions De Montage Et De Service página 29

DE15F, DE24F, EA15F, EA24B, EA24D, EA24F
6.5 Placing the device
I
NOTE
• Observe the device's dimensions and safety distances when install-
ing the device (fig. e, page 10fig. a, page 8 to fig. h,
page 11fig. b, page 8).
• Ensure that the door can be opened completely and is not blocked
by other objects.
DE15F, DE24F, EA15F, EA24B, EA24F
1. Ensure that the door is locked when moving the device.
2. If necessary, tape the door with duct tape.
3. Position the device.
EA24D only
1. Fix the drawers with duct tape when moving the device.
2. Attach the anti-tip brackets on the floor (fig. i, page 12fig. d, page 10).
3. Position the device.
6.6 Connecting the device to the power supply
A
NOTICE! Damage hazard
• Do not modify or damage the plug.
• Do not plug the device in an socket that can be turned off by a switch
or pull chain.
• To avoid voltage drops and loss of performance do not use adapters,
extension cords, or power strips.
• Ensure that an residual current circuit breaker is installed to the
power supply. Seek advice from a trained electrician.
• Observe the input voltage (see chapter "Technical data" on
page 40).
I
NOTE
Let the device stand upright for 24 hours before connecting it to the
power supply.
➤ Plug the device into a AC socket.
EN
Installation
29