Available Accessories - Craftsman CMCGG001 Manual De Instrucciones

AVAILABLE ACCESSORIES

CMCGGA001
CMCGGA002
CMCGGA003
CMCGGA004
Attaching and Adjusting the Shoulder
Strap (Fig. N)
Optional accessory, sold separately.

WARNING: The shoulder strap should only be slung
over one shoulder and not across the body. See Fig N.
A shoulder strap is recommended for any tool with a total
weight exceeding 13lbs. (6 kg). (Total weight includes
the tool, attachment, and battery.) A shoulder strap
is available at an additional cost from CRAFTSMAN at
www.craftsman.com or call 1‑888‑331‑4569, part
number CMCGGA004. Attach the strap to the tool as shown
in Fig. N and adjust for proper balance and support

WARNING: The strap should only be slung over one
shoulder and not across the body. See Fig N.
1. Snap the shoulder strap latch
strap mount 19 located on the unit, just in front of the
ON/OFF trigger as shown in Fig. n.
2. Adjust the strap so it fits over your shoulder and
provides proper balance and support.
VersaTrack™ (Fig. O)
Optional accessory, sold separately.

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments, accessories or when filling
with grease. An accidental start‑up can cause injury.

WARNING: To reduce the risk of serious personal
injury, do not use a damaged VersaTrack™ hang hook
or VersaTrack™ Trackwall. A damaged VersaTrack™
hang hook or VersaTrack™ Trackwall will not support
the weight of the tool.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the VersaTrack™ hang
hook is securely tightened.

WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the hang hook. ONLY suspend tool on the
VersaTrack™ Trackwall using the hang hook.

WARNING: The Versatrack™ integral hang hook is not
a belt hook.

WARNING: Ensure that the tool weight does not
exceed the maximum rated weight of 20 lb (9 kg) for
the selected VersaTrack™ hook.
Heavy Duty
1/8" NPT Grease Gun Coupler
Heavy Duty, 3-Pack
1/8" NPT Grease Gun Coupler
Right Angle Grease Gun Coupler
Shoulder Strap
31 onto the shoulder

WARNING: When hanging objects on a VersaTrack™
Trackwall rail, adequately space the tools in order to not
exceed 75 lb (35 kg) per linear foot.
iMPORTAnT: When attaching the VersaTrack™ hang hook,
use only the screw that is provided. Be sure to securely
tighten the screw. VersaTrack™ accessories mount compatible
tools securely to the VersaTrack™ Trackwall system.
1. Turn the tool off, remove the battery pack
and accessories.

CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
the VersaTrack™ Trackwall.
2. Attach the hang hook
a. Place the VersaTrack™ hang hook onto the mounting
location 35 at the base of the tool.
b. Use a screwdriver to secure the hang hook with the
provided screw 33
for this.
nOTE: VersaTrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1‑888‑331‑4569.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a CRAFTSMAN factory service center
or a CRAFTSMAN authorized service center. Always use
identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at www.craftsman.com/registration
34 on the tool.
. Do not use any other screw
EnGlish
13