Husqvarna LE 322R Manual De Usuario página 17

• Do not cut more than ⅓ of the length of the
grass. Cut first with the cutting height set
high. Examine the result and lower the cutting
height to an applicable level. If the grass is
very long, drive slowly and cut 2 times if
necessary.
• Cut in different directions each time to prevent
stripes in the lawn.
• Keep the cutting cover clean. Buildup from
grass and dirt on the inner side of the cutting
cover can decrease the cutting result. Refer to
To clean the product on page 19 .
To set the cut mode
The product can be set to a cut mode. You can
select between 3 cut modes for the product, refer
Symbols on the product on page 4 .
to
Note:
When the product is in operation, it is
automatically set to Mulching/High quality mode.
Note:
When the battery is weak, the product
operates in Sensing mode.
1. Start the product, refer to
on page 15 .
2. Press the cut mode button to change the cut
Cut mode on page 18 .
mode, refer to
1840 - 004 - 18.10.2022
To start the product
1
2
17