Technical Specifications - septodont SYG-200 Manual De Instrucciones

Warning:
Do not modify this equipment without authorization of the manufacturer.
1. Preface
Thank you for your confidence in the SYG-200 dental amalgamator. This device is controlled by
a microprocessor; it has a function to set the running time exactly and is operated very easily.
Please read this manual carefully before you begin to use the mixer and keep it close to the
mixer.
SYG-200 shall only be operated by qualified dental personal.
Intended use
This device is used to mix silver with mercury in a capsule presentation and to make alloy in the
best manner. So the quality of teeth recovery level is elevated. It is used instead of the former
manual method, not only creating easier mixing conditions but also decreasing the mercury
pollution in the dental practice. So the health of the human body is preserved.
2. Product diagram
① Cover
⑤ Extend time
⑨ Power supply
3.

Technical specifications

1) Power supply
Power input: ～100-240V, 1.0-0.5A, 50/60Hz; Output: 24V
Model: EM1024RR; Manufacturer: EDACPOWER ELECTRONICS CO.,LTD.
2) Main unit power input: 24V
3) Oscillation frequency: 4600rpm
Fig.1
② Start
⑥ Decrease time
⑩ Power plug
1.5A
③ Capsule holder
⑦ Power ON/OFF
- 2 -
④ Display
⑧ Power jack
1.5A; Fuse: T2A/250V;