Di4 Gyro Laser 2000 Manual De Instrucciones página 35

OPERATING INSTRUCTIONS
Placement of the Charging Base
Place the charging base against the wall,leaving the safety distance left and right each 1 meter and
front 2 meters. Warning: don't put it close to the mirror ,avoid direct sunlight.
Charging
Place the main unit in the charging stand to charge the machine, and pay attention to the charging
pole piece key flashing indicates charging, light on or off means charging finished
Auto charge
Pls press button , robot will start auto charging
When the cleaning is finished or the power is too low, the robot will automatically
start looking for the charging stand to charge.
Please keep the charging stand powered on, otherwise, the machine will not be able
Notes on charging
A. When the battery is low, light always on
B. When the robot is charging, the light
C. After fully charged, light always on
D. Please check the charging status of the robot after the power runs out
E. When charging for the first time, please make sure the robot is charged for at least 12 hours
F. If you do not use the robot for a long time, please turn off the machine
G. Please place the machine on the charging base during daily use and make sure the charging base
is connected to the power supply
H. When the battery is low, the robot will find the charging base for charging. Please make sure that
there are no obstacles around the charging base
flashes