Di4 Gyro Laser 2000 Manual De Instrucciones página 74

INSTRUCCIONES DE USO
Platzierung der Ladestation
Stellen Sie die Ladestation an die Wand, lassen Sie den Sicherheitsabstand links und rechts je 1 Meter
und vorne 2 Meter. Warnung: nicht in die Nähe des Spiegels stellen, direkte Sonneneinstrahlung
vermeiden.
Laden
Stellen Sie das Hauptgerät in die Ladestation, um das Gerät aufzuladen, und achten Sie auf die Taste
, die blinkt, um den Ladevorgang anzuzeigen, und die Lampe
wenn der Ladevorgang abgeschlossen ist.
, die leuchtet oder erlischt,
Auto-Ladung
Pls press button , robot will start auto charging
When the cleaning is finished or the power is too low, the robot will automatically
start looking for the charging stand to charge.
Please keep the charging stand powered on, otherwise, the machine will not be able
Notes on charging
A. When the battery is low, light always on
B. When the robot is charging, the light
C. After fully charged, light always on
D. Please check the charging status of the robot after the power runs out
E. When charging for the first time, please make sure the robot is charged for at least 12 hours
F. If you do not use the robot for a long time, please turn off the machine
G. Please place the machine on the charging base during daily use and make sure the charging
base is connected to the power supply
H. When the battery is low, the robot will find the charging base for charging. Please make sure
that there are no obstacles around the charging base
flashes