Black and Decker BDSTGA9701 Instrucciones De Ensamble página 16

Step 15. Install the fasteners in the order shown using a 4 mm hex key.
DO NOT FULLY TIGHTEN.
X
Z
Step 16. Rotate the top legs up and install the fasteners. Tighten with a
4 mm hex key and 10 mm wrench simultaneously, then tighten
the screw above it (see picture) with the same tools.
Tighten
16
4 x T
4 x Z
4 x X
2 x T
2 x X
2 x W
Repeat on
right side