Black and Decker BDSTGA9701 Instrucciones De Ensamble página 19

Step 20. Install the rotation lock on the same side as the
handle. Tighten hardware with 10 mm wrench
and 4 mm hex key until the lock securely stays
in place when rotated up and down. If lock is
too loose, it may disengage unexpectedly.
Handle and lock are on the same side.
Lock H
Bolt U
Nylon washer goes
BETWEEN the lock
and the frame
Nylon washer Y
Side view
1 x H
1 x U
2 x Y
1 x W
Back view
Nut W
Lock H
19