Section 3: Install The Composter Barrel On The Base - Black and Decker BDSTGA9701 Instrucciones De Ensamble

Section 3: Install the Composter Barrel on the Base

Step 21. Two people are needed for this stage of the assembly. Flip the lock
handle downwards, and ensure the indicated bolts are loose to allow for
movement of the upright arms.
Ensure these
bolts are loose
Step 22. For this step, one person should hold the barrel, and the second person
should help guide the shaft into the base.
Place the barrel in the base, guiding the shaft into the holes on the inside
of the base arms. Gently pull the arms outwards to fit the shaft.
Ensure the handle does not block the side of the door base panel.
Place shaft in this hole
Inside of main arm
20
Flip the lock handle downward
Ensure these bolts are loose
Ensure the barrel is
oriented as shown
Place shaft in
this hole