Black and Decker BDSTGA9701 Instrucciones De Ensamble página 17

Step 17. Place a horizontal stabilizer bar between the top support legs and
install the fasteners in the order shown. DO NOT FULLY TIGHTEN.
X
Z
Align the holes in the side support, main leg, and
horizontal stabilizer bar
Step 18. Install the handle on the main leg. Tighten fasteners with a cross head
screwdriver. NOTE: Handle can be installed on left support arm for left-
handed operation. See Step 19 for details.
4 x T
4 x Z
4 x X
1 x F
2 x AA
17