To Start With A Throttle Handle With A Start Throttle Lock; General Work Instructions; To Stop The Product; Blade Thrust - Husqvarna 535RX Manual De Usuario

Note:
If the engine stops, do the procedure again.
To start with a throttle handle with a
start throttle lock
1. Push the throttle lockout and the throttle trigger to
set the throttle to the start position. Then push the
start throttle button (A).
2. Release the throttle lockout and the throttle trigger,
followed by the start throttle button. The throttle
function is now activated.
3. To return the engine to idle speed, push the throttle
lockout and throttle trigger again.

To stop the product

• Move the stop switch to the stop position to stop the
engine.
CAUTION:
automatically goes back to run position.

Blade thrust

A blade thrust is when the product moves to the side
quickly and with force. A blade thrust occurs when the
grass blade or saw blade hits or catches on an object
that cannot be cut. A blade thrust can eject the product
or operator in all directions. There is a risk of injury to
the operator and bystanders.
The risk increases in areas where it is not easy to see
the material that is cut.
Do not cut with the area of the blade that is shown in
black. The speed and movement of the blade can cause
18
A
The stop switch
blade thrust. The risk increases with the thickness of the
branch that is cut.

General work instructions

WARNING:
tree that is in tension. It can spring back to
its normal position before or after the cut and
hit you or the product, and cause injury.
• Clear an open space at one end of the work area,
and start the work from there.
• Move in a regular pattern across the work area.
• Move the product fully to the left and right, to clear a
width of 4–5 m on each turn.
• Clear a length of 75 m before you turn and go back.
Move the fuel can along with you as you continue.
• Move in a direction where you do not go across
ditches and obstacles more than necessary.
• Move in a direction where the wind makes the cut
vegetation fall in the cleared area.
• Move along slopes, not up and down.
Be careful when you cut a
1069 - 008 - 31.10.2022