To Start The Product - Husqvarna 320iL Manual De Usuario

• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Examine the motor for dirt or cracks. Use
a brush to clean the motor from grass and
leaves. Use gloves when it is necessary.
• Examine the trimmer head and cutting
attachment guard for damages or cracks.
Replace the trimmer head and cutting
attachment guard if they are hit or if they have
cracks.
• Make sure that all nuts and screws are tight.
• Make sure that all covers, guards, handles
and the cutting equipment are correctly
attached and not damaged before you start
the product.
To connect the battery charger
WARNING:
charger in ambient temperatures
between 5°C/41°F and 40°C/104°F.
1. Connect the battery charger to the voltage
and frequency that is specified on the rating
plate.
2. Put the plug in a grounded power outlet. The
LED on the battery charger flashes red 1 time
and green 1 time.
To charge the battery
CAUTION:
battery, the battery charger and the
terminals on the battery are clean and
dry. Do not put the battery in the
battery charger if it is dirty or wet.
1. Connect the battery charger to a power outlet.
The charging LED flashes red 1 time and
green 1 time.
CAUTION:
battery charger to a power outlet
with the voltage and frequency
specified on the rating plate.
2. Connect the battery to the battery charger.
The charging LED comes on.
3. Remove the battery from the battery charger
when it is fully charged. Push the battery
indicator button for battery status. When all
the LED indicators come on, the battery is
fully charged.
1511 - 009 - 07.07.2022
Only use the battery
Make sure that the
Only connect the
4. Pull the power plug to disconnect the battery
charger from the power outlet. Do not pull the
power cord.
To connect the battery to the product
WARNING:
original batteries with the product.
1. Make sure that the battery is fully charged.
2. Push the battery into the battery holder of the
product. The battery locks into position when
you hear a click.
CAUTION:
not move easily into the battery
holder, the battery is not installed
correctly. This can cause damage
to the product.
3. Make sure that the battery is installed
correctly.
Battery information
Refer to the operator's manual of the battery for
information about how to use the battery.

To start the product

1. Push and hold the power button until the
green LED comes on.
Only use Husqvarna
If the battery does
15