To Start With A Throttle Handle With A Start Throttle Lock; To Stop The Engine - Husqvarna 533RS Manual De Usuario

WARNING:
from the spark plug cap. Risk of burn
injuries. Do not use the product with
a damaged spark plug cap. Risk of
electrical shock.
To start the product (543RS, 553RS)
1. Move the stop switch to the start position.
2. Push the air purge bulb until fuel starts to fill the air
purge bulb.
3. Move the choke control to the choke position.
4. Hold the product to the ground.
5. Pull the starter rope handle slowly with your right
hand until you feel resistance.
WARNING:
rope around your hand.
48
Keep body parts away
Do not wind the starter
CAUTION:
rope to full extension and do not let go of
the starter rope handle. This can cause
damage to the product.
6. Pull the starter rope handle quickly and with force
until the engine starts.
7. Set the choke control to the operation position.
WARNING:
from the spark plug cap. Risk of burn
injuries. Do not use the product with
a damaged spark plug cap. Risk of
electrical shock.
To start with a throttle handle with a start
throttle lock
1. Push the throttle lockout and the throttle trigger to
set the throttle to the start position. Then push the
start throttle button (A).
2. Release the throttle lockout and the throttle trigger,
followed by the start throttle button. The throttle
function is now activated.
3. To return the engine to idle speed, push the throttle
lockout and throttle trigger again.

To stop the engine

1. Push the throttle trigger to the idle position.
2. Move the stop switch to the stop position.
Do not pull the starter
Keep body parts away
A
1756 - 001 - 08.06.2022