No-Load Cycle For Trays With Container Outside Of The Chamber; Interruption Of The Cycle In Progress - Fulgor Milano FVSD 2900 Manual De Uso

Envasadora al vacio en cajon
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 210
FVSD 2900
User instructions

NO-LOAD CYCLE FOR TRAYS WITh CONTAINER OUTSIDE OF ThE ChAMBER

Request the most suitable vacuum containers and suction device from your regular dealer.
If you work with containers that exceed the capacity of the vacuum chamber, use the dedicated
accessory.
Activate the tray cycle suitable for the type of container and press the suction device from the suction
inlet side (at the top right of the vacuum chamber), and from the container side.

INTERRUPTION OF ThE CYCLE IN PROGRESS

By pressing the
key, an acoustic signal warns that the cycle is interrupted immediately.
The bag is not sealed and the tank is decompressed.
After the unload phase the luminous indicators go back to the initial switch-on phase.
78
2.007.98 .0 - R00 - 09/2018

Publicidad

Tabla de contenido
loading

Tabla de contenido