FVSD 2900
User instructions
PUMP OIL REPLACEMENT NECESSARY WARNING
FVSD 2900 has a high performance vacuum pump, oil recirculation lubricated with a special lubricant
studied for this application.
With use of the machine, the oil undergoes deterioration due to suction of impurities and liquids.
Consequently, so as not to compromise appliance performance, the oil must be changed every 2500
cycles, corresponding to about 150 hours of functioning.
FVSD 2900 indicates when the oil must be changed.
the oil must only be changed by an authorised dealer.
On machine switch-on, reaching the limit of 2500 cycles for the first time, all of the control panel lu-
minous indicators will flash for 3 seconds and an acoustic signal can be heard (long beep).
This visual and acoustic signal informs that the pump oil must be replaced.
Any cycle can be activated in the presence of an alarm. the alarm is zeroed with the
first oil replacement intervention.
2.007.98 .0 - R00 - 09/2018
SIGNALS AND WARNINGS
79