Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
•
Have your power tool serviced by a qualified technician
using only identical replacement parts.
•
Do not over-lubricate the product.
WARNING! Switch off the power tool and remove the
battery before any maintenance.
Cleaning
•
Maintain the cleanliness of the ventilation holes and the
engine.
•
Periodically clean the housing with a sponge or cloth,
preferably after each use.
•
If the effect is not good using only the cloth or sponge,
soak it in soap to clean the dirt.
WARNING! Do not use petrol, alcohol, ammonia wa-
ter, etc., as this could seriously damage the plastic part.
DISPOSAL
Recycle the heat gun, battery, accessory and packaging. Please
do not mix the heat gun and yje battery with household waste.
TECHNICAL SPECIFICATIONS
Weight . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . 20,5x16,4x6,5cm
Material. . . . . . . . . . . . . . . . . . . . . PA6-GF30+TPE
Nozzle Diameter . . . . . . . . . . . . . . . . . . . . . 34mm
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Rated Current . . . . . . . . . . . . . . . . . . . . . . . 15A
Output temperature . . . . . . . . . . . . . . . . . . . 550ºC
Max. Air Flow . . . . . . . . . . . . . . . . . . . . .200L/min
LIST PARTS
1.
Front cover
2.
Nozzle
3.
LED light
4.
Power switch
5.
Battery connection interface
6.
Handle
7.
Power switch lock
8.
Metal hook
9.
Air inlet
10.
Flat nozzle
11.
Hook nozzle
12.
Round nozzle
10
11
· 8 ·
12
REF. 60042
610g
Publicidad
Tabla de contenido
