9
9
12P
(6 used)
To cover HIDDEN CAMS
94S
SILVER 2" BOLT
(4 of each used for the bedframe)
Carefully stand your unit upright.
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice in the
ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (H) onto the METAL PINS.
To fasten your bed frame to the HEADBOARD BRACKETS (16G), use four SILVER 2" BOLTS (94S), four WASHERS (13M), and
four NUTS (24M).
NOTE: Your bed frame must be attached to the headboard as indicated in this step.
Push a CAM COVER (12P) onto each visible HIDDEN CAM.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
415548
H
5 lbs.
B
20 lbs.
16G
1R
(8 used)
94S
WASHER
www.sauder.com/services
10 lbs.
C
2R
16G
13M
24M
NUT
13M
H
5 lbs.
A
24M
Page 13