Tabla de contenido
Publicidad
10
10
BLACK 9/16" LARGE HEAD SCREW
(8 used for the HEADBOARD BRACKETS)
A
G
16G
102S
SILVER 1" LARGE HEAD SCREW
(2 used in this step)
IMPORTANT: Remove the Headboard from the Twin Platform Bed when moving.
Carefully stand your unit upright.
Fasten the HEADBOARD BRACKETS (16G) to the ENDS (A and B). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S).
To fasten your Headboard to the 415465 Twin Platform Bed, finish drilling the two large holes in the lower PANEL (G) and the
415465 Headboard using a 1/4" drill bit.
Next, fasten the PANEL (G) to the 415465 Headboard. Use two SILVER 1" LARGE HEAD SCREWS (102S) and two BLACK
1-1/8" PAN HEAD SCREWS (9S).
Refer back to Step 9 for Adjustable Shelves and Cam Cover assembly.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 14
Finish drilling these two
holes using a 1/4" drill bit.
1S
B
415465 Headboard
BLACK 1-1/8" PAN HEAD SCREW
(2 used in this step)
www.sauder.com/services
9S
415548
Publicidad
Tabla de contenido
