To Start The Product; To Operate The Product - Husqvarna 320iHD60 Manual De Usuario

To start the product

1. Push and hold the start/stop button until the green
LED comes on.
2. Push the power trigger lockout and one of the power
triggers for a standard operation position. To use
the extended range position, push 2 of the power
triggers.
Note:
The use of the power trigger lockout is only
necessary if you start the product in the standard
operation position.
12

To operate the product

• Hold the product with your two hands. If you operate
the product in the standard position, hold the product
near your body for a stable work position.
• If you operate the product at an extended range,
make sure that you have a stable work position.
WARNING:
product at an extended range can make
you tired.
• Start near the ground and move the product up
along the hedge when you cut the sides. Make sure
that the body of the product does not touch the
hedge.
Operation of the
1777 - 006 - 09.06.2022