To Start The Product; To Do Before You Start The Product - Husqvarna 522iHD60 Manual De Usuario

3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4. When all LEDs on the battery come on, the battery is
fully charged.
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note:
Refer to the battery and battery charger
manuals for more information.

To do before you start the product

1. Examine the work area. Remove objects that can be
thrown out.
2. Examine the cutting attachment. Make sure that the
blades are sharp, and have no cracks and damages.
3. Make sure that the product works correctly. Examine
that all nuts and screws are tight.
4. Make sure that the handle and safety devices are
not damaged and are attached correctly. Do not
operate a product with missing parts or is changed
from its initial specification. Use protective gloves
when it is necessary.
5. Make sure that the covers are not damaged and are
attached correctly, before you operate the product.
1731 - 003 - 12.10.2022

To start the product

1. Push and hold the start/stop button until the green
LED comes on.
Note:
Do not push the power trigger lockout or the
power trigger when you push the start/stop button.
2. Push and hold the power trigger lockout on the front
handle.
3. To apply full speed, push the power trigger fully.
31