To Operate The Product; To Clear Grass; Battery Information; To Start The Product - Husqvarna 220iL Manual Del Usuario

Note: Refer to the battery and battery charger manuals
for more information.
To connect the battery to the product
WARNING: Only use Husqvarna original
batteries with the product.
1. Make sure that the battery is fully charged.
2. Push the battery into the battery holder of the
product. The battery locks into position when you
hear a click.
CAUTION: If the battery does not move
easily into the battery holder, the battery
is not installed correctly. This can cause
damage to the product.
3. Make sure that the battery is installed correctly.

Battery information

Refer to the operator's manual of the battery for
information about how to use the battery.

To start the product

1. Push and hold the power button until the green LED
comes on.
2. Use the power trigger to control the speed.
1511 - 002 - 22.07.2020

To operate the product

To trim the grass
• Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer line into
the grass.

To clear grass

1. Keep the trimmer head above the ground.
2. Tilt the trimmer head.
3. Cut with the end of the trimmer line around objects in
the work area.
CAUTION: Cut grass. Other objects that
are hit by the trimmer line, increases the
wear on the trimmer line.
To cut the grass
1. Make sure that the trimmer line is parallel to the
ground when you cut the grass.
2. Do not push the trimmer head to the ground. This
can cause damage to the product.
3. Move the product from side to side when you cut
grass. Use full speed.
13