Shark Rocket HV300 Serie Guia Del Propietario página 3

(Click)
1. Insert Wand into Floor Nozzle.
Ensure all connections click securely into place.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
2. Insert Handheld Vacuum into the Wand.
2
OFF
Slide switch to the bottom
to turn off power. To begin
vacuuming, slide switch to
the appropriate setting.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
NOTE: Select Carpet for stuck-on dust and debris.
UPRIGHT
To clean floors, place foot on floor nozzle
and tilt handheld vacuum back.
Wand Release
Button
ABOVE-FLOOR HANDHELD
Press the Wand Release button to lift the handheld
vacuum off the wand. Great for cleaning stairs and
furniture.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
SETTINGS
SETTING I
Bare Floor/Small Area Rugs Carpet
The brushrolls spin slowly The brushrolls spin faster
to clean bare floors and to pick up debris below
small area rugs. the surface of your carpets.
CLEANING MODES
ABOVE-FLOOR WITH WAND
Detach the wand for more reach to clean
baseboards, ceiling fans, window sills, and other
hard-to-access areas. Stand the vacuum upright,
then step on the foot pedal on the left side of the
floor nozzle and pull the wand up to disconnect it.
SETTING II
s h a r kc l e a n . c o m