Cleaning The Crumb Tray; Cleaning The Removable Glass Panel - Jocel JTOV022097 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Never clean the inside of the toaster, as this may damage the heating elements.
Never use a metal scouring pad, abrasive materials, metal polish, harsh chemical
cleaners or hard objects for cleaning any surface of the toaster.
Wipe the outside surfaces and the cord with a soft, dry or slightly dampened cloth or sponge
and a mild detergent.
Remove crumbs after each use.

Cleaning the crumb tray

It is important that you remove and clean the crumb tray frequently to avoid the risk of crumbs catching
fire. The crumb tray is located underneath the heating elements and can be pulled out from the side of
the toaster opposite the browning control knob.
1. Pull out the crumb tray completely.
2. Discard the crumbs and wipe the tray clean with a dry or damp cloth.
3. To remove stubborn sports, use nylon or plastic scouring pad dampened in soapy water and
squeezed almost dry.
4. Make sure the tray is completely dry before inserting it back into the toaster.
5. Do not put the crumb tray in the dishwasher.

Cleaning the removable glass panel

The center front of the toaster has a full view glass window, which lets you monitor the toasting progress.
The inner panel of this window is removable.
1. Hold the toaster with one hand and lightly tilt it backwards. With the other hand, press the
latch at the underside and gently pull out the glass panel (Fig.2).
2. Wipe the panel clean, or wash it in warm, soapy water, rinse and dry thoroughly.
3. To reinsert the glass panel, lay the toaster on its back, then hold the panel by the latch and
carefully slide it back into the grooves at the side until it clicks securely into place.
Figure 2
-41-

Publicidad

Tabla de contenido
loading

Tabla de contenido