Crush Ice - KitchenAid 5KSB555 Instrucciones

NOTE: If a gap exists between the locking
collar and the base, the pitcher might not
be locked into the locking collar or the
assembly is not positioned properly on the
Blender base. See Blender Assembly, page
5 for further instructions.
Gap
3. Put ingredients in pitcher and firmly
attach lid.
4. Press the desired speed button for
continuous operation at that speed.
The green indicator light by the
selected speed will stay lit. You may
change settings without stopping the
unit by pressing a new speed button.
IMPORTANT: If blending hot foods or
liquids, remove the center ingredient
cup. Operate only on STIR (
5. To turn off the Blender, press "O". The
"O" (OFF) button will stop any speed and
deactivate the Blender at the same time.
6. Before removing the pitcher assembly,
unplug the power cord.
Using the Blender

CRUSH ICE

Your KitchenAid™ Blender offers a
CRUSH ICE (
the Blender will automatically pulse at
staggered intervals at the optimal speed
for crushing ice or other ingredients.
1. Before operating the Blender, make
NOTE: If a gap exists between the locking
No
collar and the base, the pitcher might not
Gap
be locked into the locking collar or the
collar is not positioned properly on the
Blender base. See Blender Assembly, page
5 for further instructions.
2. Put ingredients into the pitcher and
3. Press CRUSH ICE (
4. To turn off the CRUSH ICE (
)
speed.
5. Before removing the pitcher assembly,
7
) feature. When selected,
sure the pitcher assembly is properly
positioned on the Blender base.
firmly attach lid.
will stay lit. The Blender will automatically
pulse at staggered intervals.
press "O". The Blender is now ready for
continuous operation.
unplug the power cord.
Continued on next page
). The indicator light
) feature,