Care And Cleaning - Lifetime Air FT-23A Manual De Instrucciones

8. Open the 2 locking clips on the rim of the front guard.
9. Hang the front cage (7) onto the rear guard using the
position fixer on the guard's rim, then join them together by
closing the clips.
10. Secure the front cage and the rear guard with the small
screw and nut (8).
OSCILLATION CONTROL
1. Use the buttons on the fan body to turn the fan on or off
and to change the speed:
0 - stop; 1 - low speed, 2 - high speed
2. Oscillation: Push the oscillation knob to make the fan move
from side to side. Pull the oscillation knob to stop the
movement.
3. Pitch: To change the pitch angle of the fan, push the fan
guard up or down to the desired angle.

CARE AND CLEANING

To take care of your fan safely, remember to follow these
instructions:
• Before cleaning the fan, always remove the plug from the
mains socket and allow the fan to stop completely.
• Do not allow water to drip onto or enter the fan housing.
• Always use a soft wet cloth to clean the body, and a
vacuum cleaner to clean the dust from the blades.
• Do not use any of the following agents as a cleaner:
gasoline, thinners or benzene.
• If you believe that a malfunction may have occurred, do
not try to repair the fan yourself as this may cause a fire
hazard or electric shock.
• Clean the fan grill, housing and base with a soft, damp
cloth.
• Do not attempt to remove the fan blades. Exercise caution
around the motor housing area.
• Do not allow the motor or any other electrical components
to be exposed to water.
• If your fan is not required for some time and you place it in
storage, it is important to keep it in a safe and dry location.
It is also important to protect the fan head from dust. We
strongly recommend using the original box when storing
the fan.