Settings; Acoustic Signals; Child Lock Function; Before First Use - Electrolux EWX127410W Manual De Instrucciones

16 www.electrolux.com

8. SETTINGS

8.1 Acoustic signals

The acoustic signals sound when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button AquaCare and
button Tiempo de secado at the same
time for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.

8.2 Child Lock function

With this function you can leave the
appliance unattended and prevent that
the children play with the control panel.

9. BEFORE FIRST USE

1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in
the compartment for washing phase.

10. DAILY USE - WASHING ONLY

WARNING!
Refer to Safety chapters.

10.1 Loading the laundry

1. Open the appliance door
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
• To activate/deactivate this function,
press Tiempo de secado and Inicio
Diferido at the same time until the
indicator comes on/goes off in
the display.
You can activate this option in two ways:
• After you press Inicio/Pausa: the
options and the programme knob are
locked.
• Before you press Inicio/Pausa : the
appliance cannot start.
5. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.