Cleaning And Maintenence - MaxPro PROFESSIONAL MPBDP13 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Drill Diameter
( mm )
Φ 3
Φ 4
Φ 5
Φ 6
Φ 9
Φ 13
Φ 15
Φ 16
Power supply: AC 220-240V 50Hz single phase The motor can be turned on or off by switch k. Note: A
socket shall be provided for earth connection when arranging sockets, so tha the case of the machine can
be reliably earthed to avoid electric shock.

CLEANING AND MAINTENENCE

The drill is maintenance-free to a large extent. Keep the equipment clean. Pull the power plug before doing
any cleaning and maintenance work on the appliance. Do not use any harsh, abrasive solvents to clean.
Ensure that no liquid seeps into the equipment. Regrease all bare parts when the work is finished. The drill
pillar, blank parts of the column, and the drill table especially should be regreased at regular intervals. Use
a standard, acid-free lubricating grease to do this. Important: Do not use your household trash can as a
receptacle for oil and grease-soaked cleaning rags or grease and oil sludge. Dispose of these toxic materials
in an environmentally friendly fashion. Regularly check and clean the ventilation holes. Store the equipment
in a dry room. Should the equipment become damaged, do not try to repair it yourself. Leave this work to
the hands of a qualified electrical technician. We recommend that you clean the equipment immediately
after you use it. Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in the appliance. Ensure that no water can
get into the interior of the equipment.
Storage
Store the equipment and accessories out of children's reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original
packaging.
ENVIRONMENT
• Do not dispose of electric tools, accessories and packaging together with household waste material
- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
Steel
Cast Iron
1900
1900
1900
1550
1550
1000
1000
800
540
620
450
450
280
450
280
280
Electric Circuit Diagram
MPBDP16
Material
Aluminum
Rotativespeed R. P. M
2350
1900
1550
1000
800
540
450
450
GB
Plastics
Wood
2350
2350
2350
2350
1900
1900
1900
1900
1550
1550
1000
1000
800
800
620
620
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mpbdp16

Tabla de contenido