Installing The Stove - Hergom MANCHESTER Instrucciones Para Instalación, Uso Y Mantenimiento

5 - INSTALLATION
UNPACKING
Industrias Hergóm has packed that Manchester log
stove with the utmost care for safe shipment.
However, under certain circumstances it may be
damaged during transportation and handling.
When you receive your stove, unpack it and
inspect it carefully, including all enclosed parts. If
any parts are damaged or missing, please contact
your Hergóm dealer immediately.

INSTALLING THE STOVE

Choose a location for your Manchester log stove.
Check the location to ensure the stove and chimney
pipes are at the appropriate distance from nearby
combustibles materials. These can be the walls,
floor, ceiling or the chimney flue or items installed
on them. You should carefully consider the
distances to these combustible objects before
operating the stove.
If the ground on which the stove is to be placed
is made of combustible material, place a non-
combustible protective element between the floor
and the stove. An example of a non-combustible
protector for flooring is a base built with tiles,
bricks, slate, glass or other non-combustible
materials.
FIG. 1 - Recommended dimensions of the non-combustible
floor protection.
DISTANCES TO COMBUSTIBLE SURFACES
It is very important to comply with the minimum
safety distances to combustible objects, such as
walls and ceilings when installing the stove near a
combustible surface.
Distance in mm.
Distance from the
front in mm.
FIG. 2 - Distance to combustible surfaces
37
Parallel Corner
E F G H
500 300 443 884
1000
I
500