Oster TSSTTVDG01 Manual De Instrucciones página 16

Using the Warm Function (See Fig. 9)
Step 1. Turn the Function Knob to the Warm function.
Default Temperature: 150ºF.
Default Time: 60 minutes.
You may manually activate the Turbo
Convection Heat by pressing the Turbo
button once to turn it on. The blue light of
the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature/Time Knob if
you wish to increase or decrease the
temperature setting. The frame around the
temperature setting on the LCD display will
be blinking. For the Warm Function, the
temperature can be set from 150 to 200ºF
in 25-degree increments. Once you have
selected the desired temperature, press the
knob once to set that selection. The frame
of the temperature will disappear and the
frame of the time setting will start blinking.
Step 3. To set the time:
Turn the Temperature/Time Knob if you
wish to increase or decrease the warming
time. The maximum time setting for Warm
is 60 minutes (1 hour). Once you have
selected the desired warming time, press
the Start button to initiate the warming
process. The frame of the time will
disappear.
Step 4. To Start:
Press the Start/Cancel Button to start the
warming process. The red Start/Cancel
Button light will illuminate. The LCD
Display will show the Warm Function,
the countdown time and the selected
temperature. The unit will begin to work
and the timer will start counting down.
English-16
Figure 9