Oster TSSTTVDG01 Manual De Instrucciones página 7

Using the Toast Function (See Fig. 2)
Step 1. Turn the Function Knob to the Toast
function. When you select the Toast function,
the 1-7 color shade setting indicator will
become visible on the LCD. Both upper and
lower heating elements will heat.
Default Color Shade Setting is 4. This will
be the default every time the Toaster Oven
is unplugged and plugged back in. If the
Toaster Oven remains plugged in since
the last time you have selected a different
shade for the Toast function (even if not
activated), the unit will remember the last
shade setting you selected.
NOTE: The bottom rack position is recommended
for toasting.
The temperature or time is not adjustable
for the Toast function.
Step 2. To adjust the shade color:
Turn the Temperature/Time Knob to adjust
the shade color. The color shade-setting
indicator will show your selection as you turn
the knob. The frame around the shade setting
indicator on the LCD display will be blinking.
Step 3. To Start:
Press the Start/Cancel Button to start the
toasting process. The red Start/Cancel
Button light will illuminate. The LCD
Display will show the Toast Function, the
shade color selection and the countdown
time. The unit will begin to operate and the
timer will start counting down. (Step 3)
When the Toasting is complete, the unit
will emit 3 beeps. The LCD and the Start/
Cancel Button Light will turn off after 30
seconds.
NOTE: You can cancel the toasting cycle at any
time by pressing the Start/Cancel Button
once.
English-7
Figure 2