MedLinket ESM201 Manual Del Usuario página 18

10.4. After measurement is finished the cuff will deflation automatical-
ly then the systolic/diastolic blood pressure, pulse rate and blood
pressure unit will be displayed and stored. If irregular heartbeat is
detected the pulse icon
Systolic Pressure
Diastolic Pressure
Pressure Bar Indicator
Note: The blood pressure monitor provided with an automatic power shut-off
function. you should press the ON/OFF button again to turn on the power to
have a measurement again, and allow at least 3 minutes between measure-
ments on the same person.
Warning
● When the systolic pressure ≥140 mmHg (18.7 kPa) and/or diastolic
pressure ≥ 90 mmHg (12 kPa) the continuous beep that reminding
your blood pressure is abnormal.
● If you feel any uncomfortable such as the cuff is inflated for a long
time it may be a risk. You must stop the measurement by pressing
ON/OFF button .
● If the cuff pressure is over 300 mmHg (40 kPa) without deflation
automatically please remove the upper arm cuff.
● Repeat measurements will cause the upper congestion and then
affect the measurement result. Improvement method: remove the cuff
and relax for 2~3 minutes then take a measurement again.
● Always measure on the same position.
● The blood pressure is affected by many factors.
Warning
will flash.
108
01/10
11： 30
65
mmHg
1
63
Blood Pressure Monitor
English 18
Data
Time
SYS
mmHg
DIA
mmHg
Pulse Rate
Pulse
/minute