Publicidad
Idiomas disponibles
Idiomas disponibles
8. Recommendations for a proper access to the model
Access
8 .1
Disconnect condensate drain connection R1 so as to avoid hampering with drain pan L1 .
8 .2
Remove deflector L3 and unfasten screws A of drain pan L1.
8 .3
Bring drain pan L1 to the position shown in figure.
8 .4
To reach the heaters placed under the coil remove the inner drip trays L5 by unfastening screws B .
8 .5
It is possible to reach the header site by unfastening screws C and removing the fan shroud L2 .
Reassembling
8 .6
Reposition the inner drip trays L5 and fan shrouds L2 by fastening screws B and C .
8 .7
Reposition the drain pan L1 and fasten it with screws A .
8 .8
Reposition deflector L3 and reconnect condensate drain connection R1.
L1
=
Drain pan
L2
=
Fan shroud
L3
=
Deflector
L4
=
Supports
L5
=
Drip tray
R1
=
Drain connection
SD1
=
Junction box (fans)
SD2
=
Junction box (heaters)
=
Ground pole
28
www.modine.com
Figure 4
Publicidad
