Hydas AD-2014 Instrucciones Servicio página 26

Troubleshooting
PROBLEM
You have no
feeling of
stimulus.
Stimulus is weak.
The skin
becomes red.
POSSIBLE CAUSE
Are the batteries
exhausted?
Are the batteries
properly loaded?
Is the wire properly
connected?
Have you removed the
transparent protection
fi lm over the electrode
pad?
Do the electrode pads
fi rmly stick to the skin?
Are the electrode pads
overlapped?
Are the electrode pads
dirty?
Is intensity too weak?
Are the electrode pads
properly positioned?
Is the therapeutic time
too long?
Do the electrode pads
fi rmly stick to the skin?
Are the electrode pads
too dry?
SOLUTION
Replace the batteries.
Correctly load the
batteries.
Firmly connect the wire.
Remove the transparent
protection fi lm over the
electrode pad.
Firmly stick the electrode
pad to the skin.
Separate the electrode
pad and stick them to the
skin gain.
Please clean the electro-
de pad.
Turn the intensity regula-
tion dial to regulate it.
Change the position of
the electrode pad.
Control it within 10-15
minutes a time.
Please fi rmly stick the
electrode pad to the skin.
Please gently wipe them
up with wet cloth and
then use them again.
27