Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
At the end of each work session, or when required, remove any dust from the body of the tool using a soft cloth, paying particular
attention to the motor ventilation slots.
No other maintenance operations must be undertaken by the user.
REPAIRS
Maintenance and cleaning of the inner parts like ball bearings, gears etc. or others, must be carried out only by an authorized
customer service workshop.
DISPOSAL (WEEE DIRECTIVE)
For EU countries only: According to the European Directive on Waste from electrical and electronic equipment and its
implementation in conformity with national standards, exhausted electrical equipment must be collected separately, in order
to be recycled in an environmentally friendly way. The product, when it reaches the end of its life, must not be dispersed in
the environment or thrown away as household waste. It must be disposed at authorized recycling centres (contact your local
authorities to know where to dispose of the product according to the law). The correct disposal of the product contributes to the
health and preservation of the environment. Illegal disposal of the product will entail penalties against the offenders.
EU DECLARATION OF CONFORMITY
We declare on our responsibility that the represented tool is in conformity with the directives:
2006/42/EC, 2014/30/EU, 2011/65/EU.
The tests have been carried out in accordance with standard:
EN 62841-1:2015 + AC:2015
EN 62841-2-4:2014 + AC:2015
EN 55014-1:2021
EN 55014-2:2021
EN 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019 + A2:2021
IEC EN 63000:2018.
10
Vermezzo con Zelo (MI), 20/12/2022
Via Marconi, 3/A - Loc. Vermezzo
20071 - VERMEZZO CON ZELO (MI) - Italy
G. Valentini
Technical file at:
RUPES S.p.A.
Publicidad
