Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning Your Humidifier
To keep your humidifier running efficiently, clean it regularly. Weekly cleaning is recommended. All maintenance
should be done in the kitchen or bathroom on a water resistant surface near a faucet.
To properly clean your humidifier, we recommend the separate processes of Scale Removal and Disinfecting.
These two processes must be performed separately.
Before Cleaning
If the humidifier has recently been in use
on the warm setting, wait at least 20
minutes for unit to cool before beginning
the cleaning process.
1.
Turn off and unplug humidifier.
NEVER clean the humidifier when it is running.
2.
Remove Water Tank and empty completely. Remove any accessories from the water tank.
3.
Ensure Chimney is removed (See Disassembly below), then pour solution from the Base into the sink. Be
sure to pour out of the side of the Base, as indicated by an arrow, to avoid leaking into the Control Panel.
4.
Replace Chimney and Chimney Cover before beginning the cleaning process.
Disassembly
1.
Mist Chimney Cover – a) slide blue
latch and b) remove.
2.
Mist Chimney – grasp Chimney and
pull straight up.
3.
Mist Outlet – pull out of Mist
Chimney Cover (optional).
Reassembly
1.
Replace Mist Chimney.
2.
If removed, replace Mist Outlet on
top of Mist Chimney Cover.
3.
Slide the blue latch a) and place the
Mist Chimney Cover in place
b); secure the latch.
Scale Removal (Mineral Build-up)
Follow steps 1-4 in Before Cleaning section, then follow the additional steps below.
1
2.5
C
1.
Pour 2.5 cups (.6 liters) of undiluted distilled white vinegar into the Water Tank.
2.
Replace Tank Cap and swish vinegar in Tank to coat the inside of the Water Tank.
3.
Place Tank on Base, allowing vinegar to drain into the Water Reservoir. The vinegar will loosen mineral
buildup on the Nebulizer, Heating Element and Float, and in the bottom of the Tank. Soak for 20 minutes.
4.
Remove Water Tank and empty vinegar into sink.
8
1
1
b
1
2
2
2
a
2
3
3
3
3
b
a
4
Publicidad
