Descargar Imprimir esta página

Klarstein RHONE 25 DUO Manual De Instrucciones página 44

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
44
INSTALLATION
Location
The location you have selected for your wine cellar should:
be unencumbered and well ventilated;
be well away from any heat source and direct sunlight;
not be too damp (laundry, pantry, bathroom etc.);
have a flat floor;
have a standard and reliable electricity supply
have a surge protector fitted to the electrical outlet;
Away from the microwave oven. Certain microwave ovens do not have wave
interference shield. When placed within 1 meter vicinity of the wine cabinet,
they may affect the operation of the wine cabinet.
Placing in cold or hot temperature conditions may cause cellar's temperatures
fluctuating, and it will not reach the ideal one.
Installation
Unpack and remove all of the protection and adhesive strips from the packaging
around and inside the wine cellar.
The wine cellar must be positioned such that the plug is accessible. Release
the power cord. Move your wine cellar to its final location. The wine cellar
should be installed in a suitable place where the compressor will not be sub-
ject to physical contact.
Wine cellar must be levelled before loading your wines. Your wine cellar is
equipped with 4 adjustable feet to facilitate easy levelling. The cooler recom-
mends that you tighten the back feet to the maximum and adjust the front
feet to level the wine cellar.

Publicidad

loading

Este manual también es adecuado para:

10041239