Teka TBC 32010 TTC Manual Del Usuario página 39

than 2 sensors
• Touch control location may
e x p o s u r e m o r e h e a t o r
steam (from oven bottom of
the hob...)
Please be sure that there is
no any object on the sensors
and switched off all steam and
heat sources. Then,hob glass
is wiped with a dry cloth. If
error situation continue after
this solution, please take out
plug or switch off fuse switch
for 10 second.
FC Error:
Fc message on the control
and the hot plates switch off:
Overheating in the electronics.
Let thestove cool for a while.
EN
39