Publicidad
until it powers on but don't let go just yet. Continue holding
down on the power button until you see the power LED
indicator flashes blue and red alternately, which means
your headphones are in "pairing mode" waiting to be paired
with your device. You will hear a prompt.
5). Select the ''AUSDOM BASS ONE'' to pair. Once
successfully paired, the power LED turns to solid blue. You
will hear a prompt.
Note: Before pairing the headphones with computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above. AUSDOM BASS ONE will
pair with the last paired device automatically when turning
on. Because of different systems, some computers or
laptops may need to be manually paired every time.
6. Active Noise Canceling
Ausdom Bass One contains a noise-canceling circuit, noise
mainly in an airplane, buses or trains is effectively reduced.
1) The noise-canceling effect may not be pronounced in a
tranquil environment, or some noise may be heard.
2). The noise-canceling effect may vary depending on how
you wear the headphones.
3). The noise-canceling function works for noise in the
low-frequency band primarily. Although noise is reduced, it is
not canceled out entirely.
EN-4
Publicidad
