Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
21 on page 8.
• Time setting: Same as before, then the
unit will automatically adjust to the
current time and running accordingly.
• Temperature setting: Same as before.
• Setting weekly program:
• Hold
for 3 seconds to enter the
weekly program setting, the time
and working mode are no longer
displayed, and
• Is displayed until the setting has
finished, the unit stops heating
during the setting.
• The Monday marker will begin to
blink, the program name of Monday
will also blink (the corresponding
program content also shows).
• The screen shows as image 22 on
page 8.
• Press either
the daily program from P1~P9 for
Monday (1).
• Press
automatically enter the Tuesday
program (2).
• With same method you can select
a daily program for every day in a
week.
• Finally press
week program settings.
• Then the
disappear and the unit will run
according to new weekly program.
Note: Settings can be terminated at any
time during setting.
The new content will be retained.
Other notes
• The screen has a back light. It will turn
off after 1 minute if you don't press any
buttons. It will light up again if you
press any button.
• The unit has a button lock function.
The buttons will be locked (
1 minute if you don't press any buttons.
40
is shown.
or
to select
to
confirm
and
to complete the
symbol will
) after
• To open lock: press
same time.
• Time will be reset to 00:00 if you unplug
the unit, or if there is a power cut.
• This heater includes an overheat
protection
system
the heater when parts are getting
excessively hot.
•
will only show when the unit is
heating.
• The units will always go into free use
mode from standby mode.
• The unit will return to last running
mode when powered off and on.
Open window function
This function allows the radiator to
detect sudden temperature drops and can
be switched off automatically to avoid
excessive energy consumption.
When this happens the symbol
on the display. After 10 minutes the radiator
switches back on automatically.
However, you can switch the radiator
back on manually before the 10 minutes
have elapsed by pressing the
button. The symbol
the display.
This function is only available on some of
our models.
WI-FI CONNECTION
Search and download TuyaSmart APP
from Apple store or Google play.
By connecting your heater with the iOS/
Android device you can do the following:
• Set on/off
• Set running modes: Comfort/ECO/Anti
freeze/Week Program
• Set open window function
• Set weekly programs
• Set group(put heaters in one zone)
• Share the heater to other people
and
at
that
shuts
off
flashes
radiator
disappears from
Publicidad
