Publicidad
Idiomas disponibles
Idiomas disponibles
will switch on again after 10 minutes.
• Child lock: The controls of the device
will be blocked until this switch is
pressed again.
Weekly programming (images 40 - 43 on
page 12)
To program your heater, follow the steps
below:
• Tap "On"
• Tap "Select mode"
• Tap "Comfort"
• Set the temperature
• Tap "Select mode"
• Tap "ECO"
• Set the temperature
• Tap "Select mode"
• The
"Anti-freeze"
configurable and therefore does not
need to be pressed.
• Tap "Settings" and select "Program
data"
• Tap on the day and time bar you want to
program with a specific mode. You will
see a traffic light like icon
• Choose the colour that matches the
mode you want to set for this time slot.
• Scroll up or down the coloured bar to set
the start and finishing time.
• Repeat this step in all the days you
require.
• Tap "save"
• Tap "Select mode"
• Tap mode "Weekly programming".
• Now, every time you select "Mode" /
"Weekly programming" these settings
will be activated.
For example, if you want the heater to
operate on Mondays from 00:00 to 6:00
with the "Anti-freeze" mode, from 6:00 to
20:00 with the "Comfort" mode at 25ºC and
from 20:00 to 24:00 with the "ECO" mode
at 18ºC you would have follow these steps
(See image sequence 40-43 on pages 12 and
12):
• Tap "On"
• Tap "Select mode"
• Tap "Comfort"
• Set the temperature at 25ºC
• Tap "Select mode"
mode
is
not
• Tap "ECO"
• Set the temperature at 18ºC
• Tap "Settings"
• Tap "Program data"
• Tap on the Monday bar
• Select the red colour and extend the red
bar from 00:00 until 6:00
• Tap on the Monday bar next to the 20:00
hr and select the yellow colour, extend
the yellow bar from 20:00 until 24:00
• Tap "Save"
• Tap "Select mode"
• Tap on mode "Weekly programming"
and confirm.
• Now, every time you select "Mode" /
"Weekly programming" these settings
will be activated.
Note: The weekly programming bars
are set by default on the Comfort mode.
When the heater is set with the weekly
programming it cannot be switched
off, so set a minimum temperature, that
is, the "Anti-Freeze" mode, so that the
consumption is reduced to the minimum
and to avoid low temperatures in the room
and the production of ice.
Voice control
You can also voice control the following
functions of your appliance using Google
Assistant and/or Amazon Alexa:
• Temperature:
increase
temperature
temperature
• Switch on and off.
Note: Visit our YouTube channel to watch
an explanatory video about the Wi-Fi
connection and the control via APP.
CLEANING AND MAINTENANCE
Do not immerse the heater in
water.
Do
not
chemicals such as detergents
and abrasives. Do not allow the
interior to get wet as this could
create a hazard.
set
the
temperature,
and
use
any
cleaning
EN
lower
43
Publicidad
