Publicidad
Idiomas disponibles
Idiomas disponibles
MediPendant_Manual_7-16-10.pdf
STEP 3
Connect the AC/DC Adapter into the BLACK plug in the back of the base
station marked DC. See Figure 7A
STEP 4
Connect the other end of the AC/DC Adapter into a standard power outlet.
See Figure 7B
Once plugged in, your base unit will continue to beep and the RED
PHONE LINE INDICATOR LED will continue to flash. The POWER LED will
change from flashing RED to solid GREEN.
C
M
Y
CM
MY
CY
CMY
K
NOTE:
DO NOT PLUG THE AC/DC ADAPTER INTO A POWER OUTLET WHICH
IS CONTROLLED BY A WALL SWITCH. If the switch is accidently turned off,
the system will begin to beep indicating a loss of power.
NOTE:
With loss of power, the POWER LED located in the center on the top
of the base station will illuminate and flash RED and the unit will beep.
10
7/16/10
DC
EXTRA TO
PHONE JACK
STEP 3
DC
Figure 7A
2:07 PM
OWNER'S MANUAL
Figure 7B
PHONE LINE
IN FROM
WALL OUTLET
EXTRA
PHONE LINE
PHONE JACK
IN FROM
WALL OUTLET
Model #MED01
STEP 4
AC/DC
Adapter
7
Publicidad
