Publicidad
Idiomas disponibles
Idiomas disponibles
MediPendant_Manual_7-16-10.pdf
MediPendant
TESTING YOUR MediPendant™ FOR THE FIRST TIME
STEP 1
Press and hold the LARGE ROUND GREY
button for 3 seconds on the front of the
pendant. See Figure 10A
C
STEP 2
M
Release button and you will hear the
Y
pendant say, "Your emergency call is now
CM
being dialed, please stand by." It will say
MY
this multiple times. The green light on the
pendant will illuminate indicating that it
CY
has been activated and will remain illumi-
CMY
nated during the entire conversation with
K
the emergency operator. See Figure 10B
STEP 3
You will then hear a dial tone, followed by a dialing sequence. This is an
indication that your pendant is attempting to call the monitoring center.
STEP 4
When dialing sequence is completed, your pendant will again say, "Your
emergency call is now being dialed, please stand by."
STEP 5
Soon after, there will be a brief period of silence. This means that your
pendant is talking to the monitoring center, and establishing communication.
NOTE:
The indicator light indicator will remain solid green once connection
is established. See Figure 10B
10
13
7/16/10
™
2:07 PM
Figure 10A
Figure 10B
Publicidad
