Publicidad
Idiomas disponibles
Idiomas disponibles
MediPendant_Manual_7-16-10.pdf
STEP 6
Wait a few moments to hear the operator's voice through the pendant
identifying themselves and asking you if everything is OK.
STEP 7
Identify yourself with the operator and tell him/her that you are simply
testing your system.
STEP 8
Follow the operator's instructions to complete the test.
STEP 9
When the operator disconnects, you will hear the pendant announce,
"Help is on the way, your pendant is turning off."
C
Pendant will always make the above announcement at the end of
NOTE:
M
each call.
Y
NOTE:
The operating range of the MediPendant™ depends on many factors.
CM
It is designed to work in and outside of your home. When in use, the
pendant will emit a beep if you are out of range when talking to an operator.
MY
Before using it is required that you perform the proper tests in order to
CY
determine the unit's operating ranges at the location(s) where it will be used
CMY
in and around your residence.
K
THE BASE STATION WILL EMIT A BEEP IN THE FOLLOWING SITUATIONS:
• AC power is lost – In this situation, the POWER indicator on the top of the
base station will flash RED
• Battery power is low – In this situation, the POWER indicator on the top
of the base station will flash RED
• Telephone line is disconnected – In this situation, the PHONE LINE indica-
tor on the top of the base station will flash RED, but the POWER indicator
will stay GREEN
NOTE:
TO SILENCE ANY TONE FROM
THE BASE STATION, simply press the
SILENT button on the top right corner
of the base station for one second and
release. See Figure 11A
14
7/16/10
2:07 PM
OWNER'S MANUAL
On =
System in Use
POWER
Blinking =
Phone Line Trouble
Model #MED01
Silent
POWER
SET UP
Silent
SET UP
Figure 11A
11
Publicidad
