Publicidad
Idiomas disponibles
Idiomas disponibles
MediPendant_Manual_7-16-10.pdf
MediPendant
INSTALLING YOUR MediPendant™
Your MediPendant™ will operate using your existing telephone line and service.
No special features or services are required. Please read all notes regarding
connections with DSL and VoIP phone services.
STEP 1
Place the MediPendant™ base station on a stable surface located near a
power outlet and an available phone jack. For best results, locate the base
station in an area away from household appliances which could present
electrical interference. See Figure 6A
If you are using more than one MediPendant™ system in your home, we
recommend that you place the base stations at least 15 ft. apart from
C
each other.
M
Y
CM
MY
CY
CMY
K
Figure 6A
STEP 2
Grab RED TAB located on side of base
station and pull it straight out. Removing
tab activates back-up battery. See Figure 6B
Unit will beep continuously and the POWER
LED and PHONE LINE INDICATOR LED will
both flash RED until AC/DC adapter is
plugged in. See STEP 3.
6
9
7/16/10
™
Phone Jack
2:07 PM
Power Outlet
Figure 6B
Publicidad
