FONESTAR MP-121P Manual De Usuario página 5

Idiomas disponibles

A program consists of a series of events that are executed sequentially, each of them at a time determined

by the user, the parameters of these events being configurable in the Edit Program menu.

There aer 5 different programs to make different schedules, but only the first 4 can be assigned to each

day (1 to 4), as the fifth program is only assignable using the SWIFT button located on the front panel of the

device.

Use the navigation buttons UP, DOWN, LEFT and RIGHT to scroll through the different days of the weekand

to assign to each one of them a given program number (1 to 4). It is also possible to not assign any programs.

Note: for a program to run, it must always be configured beforehand in the Edit Program menu.

If you wish to confirm the changes, use the LEFT and RIGHT navigation buttons, place the cursor over the

OK option and then, press the confirmation button. On the other hand, if you do not wish to confirm the

changes made, place the cursor on the Cancel option and press the confirmation button.

TIME SETTING

Press the confirmation button to access the main menu. Then place the cursor over the Time Setting option.

Press the confirmation button again to access the time setting menu.

Use the navigation buttons UP, DOWN, LEFT and RIGHT to configure the parameters of this menu. The year,

month, day, day of the week, hour, minutes and seconds on the timer clock can be modified. If you wish to

confirm the changes, place the cursor on the OK option and press the confirmation button and if you wish

to save the established changes, place the cursor on the Cancel option and press the confirmation button.

Note: bear in mind that this is not an atomic clock, consequently the clock could be fast or slow. Check the

time periodically.

EDIT PROGRAM

Press the confirmation button to access the main menu. Then place the cursor on the Edit Program option.

MENU PRINCIPAL

FUNCIONAMIENTO MP3

CONFIGURACIÓN DE LA HORA

CONFIGURACIÓN DEL SISTEMA

PROGRAMA EN ESPERA

EDITAR PROGRAMA

- 5 -

MENU PRINCIP

CONFIGURACIÓ

PROGRAMA EN