FONESTAR MP-121P Manual De Usuario página 8

EN
CONNECTION
Make the connections with the player and all the components of the audio system switched off and
disconnected from the power supply.
Connect the USB storage device or the SD memory card in the corresponding inputs on the front panel.
Connect the required inputs to the inputs INPUT 1/2. Place the selector in the corresponding position
depending on the input you are connecting. If you are connecting a line input, place the selector in the
LINE position. If you are connecting dynamic microphones, place the selector in the MIC position. If you are
connecting condenser microphones, place the selector in the PHANTOM position.
Connect the required audio sources to the inputs AUX 3/4.
Connect the amplifier or autoamplified loudspeaker to the player's MASTER output. Use the balanced or
unbalanced MASTER output.
If you wish, connect a recorder, another amplifier or an autoamplified loudspeaker to the REC OUT line level
output for that purpose.
Once the connections have been made according to your needs, connect the devices to the mains supply
and switch them on. After use, do not forget to switch them off and disconnect the device from the mains
supply.
CD Player
Micro phones
- 8 -