Publicidad
Idiomas disponibles
Idiomas disponibles
EN
STANDBY PROGRAM
The standby program corresponds to the program number 5 in the Edit Program). This program is only
activated with the SWIFT button on the front panel of the device and will have priority over the rest of
programmed configurations.
The standby program is executed at a set time according to the programming of events, but the day on
which it is executed cannot be assigned in the System Setting), that's to say, this program cannot be
assigned to a specific day in the weekly setting.
The standby program can be configured on the current day, the following day or both options at the same
PROGRAMA EN ESPERA
time. Press the SWIFT button on the front panel of the device when the display shows the general information
so that the standby program is the priority option.
Press the SWIFT button repeatedly to select the days on which the standby program is executed. Below the
different options for executing the standby program are described:
1: the standby program is executed on the present day.
2: the standby program is executed on the following day.
1 2: the standby program is executed on the present day and on the following day.
If none of these parameters are shown on the screen, the standby program is not activated, consequently
the amplifier will maintain the weekly programming currently configured.
- 7 -
Publicidad
