Connecting Electric Power Tools; Service And Maintenance - Festool CT 17 E Manual De Instrucciones Original

CT 17 E
GB
The switch [1-2] serves as an on/off switch.
Switch position "0"
Appliance socket [1-4] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-4] is connected to the power,
the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-4] is connected to the power,
the mobile dust extractor starts when the connect-
ed tool is switched on.

Insert the plug into an earthed socket.
Pull the plug from the socket when the ma-
chine is not in use and prior to maintenance
and cleaning work.
6.4

Connecting electric power tools

WARNING
Risk of injury

Observe the maximum appliance socket con-
nected load (see chapter "Technical data")

Switch off the electric power tool.

Connect the electric power tool to the appliance
socket [1-4].
6.5 Adjusting the suction power

Use the rotary knob [1-3].
7 Working
7.1 Dust extraction
Extracting dry materials
Always use a filter bag.
Extracting wet materials/liquids
Remove the filter bag!
Insert a special wet filter.
The dust extractor stops automatically when the
maximum level is reached.
After wet extraction, allow the main filter to dry!
CAUTION
Escaping foam and fluids

Switch off and empty the machine immediately.
12
7.2 After finishing work

Switch off the mobile dust extractor and pull out
the mains plug.

Wind up the mains power cable.

Empty the dirt trap.

Place the mobile dust extractor in a dry room in-
accessible to unauthorised users.
8

Service and maintenance

WARNING
Risk of injury, electric shock

Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!

All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festool.com/Service
EKAT
Use only original Festool spare parts!
4
Order No. at:
5
www.festool.com/Service
3
2
1
8.1 Filter bag / disposal bag / main filter

Remove the filter bag [5].

Insert the filter bag [4].

Change the main filter [6].
Dispose of the used filter in accordance with
statutory regulations.
 The order numbers for accessories, filters and
consumables can be found in the Festool cata-
logue or on the internet at www.festool.com.
9 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble country-specific regulations.
EU only: European Directive 2002/96/
EC stipulates that used electric power tools must
be collected separately and disposed of at an envi-
ronmentally responsible recycling centre.
Information on REACh: www.festool.com/reach